Treadmaster Marine
Treadmaster Marine
Search | Statistics | User Listing Forums | Calendars | Language
You are logged in as a guest. ( logon | register )

Installing Treadmaster... I do not want to encourage any corrosion?
Moderators: Treadmaster

Jump to page : 1
Now viewing page 1 [25 messages per page]		View previous thread :: View next thread
   Help and Advice on Treadmaster Marine -> Product Support and SupplyMessage format
 
Taylor
Posted 23/4/2008 5:03 PM (#57)
Subject: Installing Treadmaster... I do not want to encourage any corrosion?


New user

Posts: 2

I have a steel boat and would like to apply treadmaster to my cockpit. Can I bond this directly to a good condition epoxy painted surface as I do not want to encourage any corrosion.
Top of the page Bottom of the page
Brian
Posted 24/4/2008 2:40 PM (#62 - in reply to #57)
Subject: Re: Installing Treadmaster... I do not want to encourage any corrosion?


Member

Posts: 12

Provided the epoxy paint is in good condition, you can bond Treadmaster directly to it using Treadmaster Marine Epoxy adhesive.
You will need to make sure the paint is absolutely clean first - wash off any dirt, abrade lightly with a Scotchbrite pad, then wipe clean with methylated spirit or acetone. Then you're ready to bond the Treadmaster.
Top of the page Bottom of the page
Taylor
Posted 1/5/2008 9:56 AM (#87 - in reply to #57)
Subject: Re: Installing Treadmaster... I do not want to encourage any corrosion?


New user

Posts: 2

Thank you Brian.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software
© 2002-2010 PD9 Software